Skip to content
Quality and Comfort For All
DODGE / CHRYSLER Caravan / Town & Country
1.Fold-seats-into-floor
2.Open-compartment-door
3.Remove-Plastic-cover
4.Removed
5.Draw-a-circular-line-at-1-inch-from-center
6.-Cut-plastic-as-shown.-straight-line-is-at-6-inches
7.-Cut-as-shown.-mirror-other-side
8.-Cut-carpet-as-shown
9.-Mark-center-as-shown
10.-Center-punch-your-mark
11.Drill-mark-using-a-half-inch-bit
12.Drill-as-shown
13.-slightly-widen-top-of-hole-with-stepper-bit
14.widened-hole-as-shown
15.Use-five-sixteenths-rivet-NUT
16.-Install-rivet-nut
17.-Rivet-nut-installed
18.-Bolt-in-front-supports
19.-Bring-out-passenger-side-seat
20.-Afix-seatbelt-to-bolts-on-underside
21.-Afix-rear-supports-over-seatbelt-and-fasten-with-nut
22.-Position-seat-in-place-pushed-against-passenger-side-seat
23.-Mark-carpet-for-drilling-rear-support-holes-
24.-Cut-carpet-around-each-hole
25.-your-own-risk-CAREFULLY-drill-hole-ABOVE-FUEL-TANK-not-more-than-half-inch
26.-Hole-over-fuel-tank
27.-Install-rivet-nuts-into-rear-holes
28.-Install-seat-and-bolt-into-place
29.-Bolt-in-with-washer
Congrads
